VigorAP 912C

Print

11ac Dual-Band Ceiling-Mount Wireless AP More 

Interface
LAN Port 1x 10/100/1000M Base-T, RJ-45, supports 802.3af PoE
Antenna 2x Internal PiFA Dual-Band
Gain: 5 dBi for 5GHz, 3 dBi for 2.4GHz
DC Power Jack 1
Factory Reset Button 1
Security Lock 1
Capacity
2.4GHz Peak Speed 300 Mbps
5GHz Peak Speed 867 Mbps
Max. Number of Concurrent Active Clients 256 (128 per radio band)
WLAN
2.4GHz Standard IEEE 802.11b/g/n 2x2 MIMO
5GHz Standard IEEE 802.11a/n/ac wave 2 2x2 MU-MIMO
Operating Mode AP, Mesh Root, Mesh Node, Range Extender
Roaming AP-Assisted Roaming, PMK-Caching, Pre-Authentication
AirTime Fairness  
Band Steering  
Auto Channel Selection  
Max. Number of SSID 8 (4 per radio band)
WDS  
Bandwidth Limit per Client  
Client Number Limit Per radio, Per SSID
Connection Time Control  
WMM  
Security
Security Mode WPA3, WPA3/WPA2, WPA2, WPA2/WPA, OWE, WPA, WEP, None
Authentication Personal, Enterprise
WPS PIN, PBC
Hidden SSIDs  
MAC Address Filter Up to 256 entries
Wireless Client Isolation  
Mobile Device Management  
Application
Built-in RADIUS Server  
RADIUS Proxy PEAP, EAP-TLS
DHCP DHCP Server, DHCP, Client, DHCP Relay Agent
Static IP  
MAC Clone  
802.1q VLAN  
Schedule Auto-Reboot, Wi-Fi Up/Down, LED On/Off
Management
Local Service HTTP, HTTPS, Telnet
Configuration Stand Alone, TR-069 (VigorACS), VigorRouter APM, VigorAP Mesh Root
Firmware Upgrade HTTP, TFTP, TR-069
Tools Speed Test, AP Discovery, Statistics, DHCP Table, Interference Monitor
Configuration Backup and Restore  
Notification Alert E-mail
SNMP v2, v2c, v3
Syslog  
Managed by VigorConnect  
Managed by VigorACS  
Physical
Environment Indoor
Mounting Ceiling Mount, Wall Mount
Power Method DC 12V @ 1A / 802.3af/at PoE
Max. Power Consumption 10 watts
Dimension 176mm x 176mm x 30mm
Weight 307 g
Operating Temperature 0 to 45°C
Storage Temperature -20 to 60°C
Operating Humidity 10 to 90% non-condensing